Vivian, Flintrock, The Hills
Iron and Spiral Staircases
- Material
- steel spiral with oak treads
- Size
- 5 ft diameter, 11 ft rise
- Est. investment
- $3,700 to $5,500
- Est. duration
- 2 to 3 days
A roof deck with no room for a straight run from the back patio
Metal Gates in The Hills, TX
Leander Metal Gates is the metro's trusted expert in gated community entries, specializing in gate operator installation, automatic gate repair, and gate opener repair. We offer iron staircases and gate replacement, including a scheduled gate service plan built and serviced by one crew.
Entry Gates, Operators and Stairs for The Hills Homes
Our team provides intercom, keypad or phone entry and solar gate operators, delivering footings, operators and finishes for both residential and commercial projects. Across 14 years in business we have finished 1,127 projects, from one walk gate to a multi-lane community entry, and each carries a 2-year workmanship warranty covering weld integrity, post plumb, hinge alignment and gate sag.
From a plain walk-through entry gate to a stair or balcony guard, our team handles each detail ourselves. Serving The Hills and neighboring Lakeway, West Lake Hills and Steiner Ranch, we start each job by reading the HOA's requirements.
Book a free estimate, and our The Hills location manager will walk the property, measure the opening and sketch the work before anything is ordered.
Recent Projects on Hurst Creek Road and in Flintrock
Jerome, Hurst Creek Road, The Hills
Gate Opener Repair
- Material
- replacement arm operator
- Size
- one operator, 12 years old
- Est. investment
- $1,950 to $2,950
- Est. duration
- 4 to 8 hours
A worn gearbox on a discontinued operator with no parts left to order
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Numbers first
Numbers You Can Check Before You Call
14 yearsFabricating gates for Leander and the 183A corridor
1,127Finished gate, fence, railing and access jobs on our books
2-yearworkmanship warranty covering weld integrity, post plumb, hinge alignment and gate sag
35 milesEast to Round Rock and Georgetown, south to Rollingwood and Sunset Valley
Jerome on Hurst Creek Road had a worn gearbox on a discontinued operator with no parts left to order. We swapped in a current operator and reused the sound wiring and the steel post, an estimated $1,950 to $2,950 job that typically took 4 to 8 hours, and he paid for one new operator instead of a slow string of repairs.
Vivian in Flintrock had a roof deck with no room for a straight run from the back patio. We assembled a steel spiral with oak treads, 5 ft diameter, 11 ft rise, an estimated $3,700 to $5,500 project that typically took 2 to 3 days, and the patio kept its full footprint.
What a Gated Community Asks of a Gate Job
The Hills is a village in Travis County of about 1.07 square miles with 2,613 people. The whole community is gated, so an entry gate or an HOA approval is part of nearly every job here.
Ask your HOA for its requirements before we draw anything, and we will build to that book. The Hills Country Club and the Lakeway Inn are both close by, which keeps the streets busy, so we schedule installs around the hours the neighborhood asks for. Every operator has battery backup and a manual release, and a gate beyond the reach of a power run gets a solar kit sized to it.
A worn operator is the most common call. Gates in a community like this cycle all day, as with a worn gearbox on a discontinued operator with no parts left to order, so we replace the operator with a current model that reuses the steel post and the sound wiring.
Metal Gate Cost in The Hills
An operator added to a manual gate in The Hills is estimated at roughly $1,850 to $3,600, and the leaf weight, the daily cycles and the operator type move the price most.
| The Hills job | Est. investment | Est. time on site |
|---|---|---|
| Operator added to a manual gate | Est. $1,850 to $3,600 per operator | Est. 4 to 8 hours |
| One-leaf automated swing gate | Est. $2,600 to $4,800 per complete system | Est. 1 to 2 days |
| Spiral stair kit or custom build | Est. $1,400 to $5,900 per stair | Est. 2 to 3 days |
| Walk-through entry gate | Est. $700 to $1,400 per gate installed | Est. 4 to 8 hours |
| Scheduled gate service plan | Est. $89 to $112 per gate per month | Est. 1 to 3 hours per visit |
A replacement typically costs less than a new gate because the posts, the pad and the wiring stay. Footings for a new leaf are belled concrete piers 36 inches or deeper, with depth and rebar decided by what the auger hits at each post.
Treat the prices for The Hills as estimates that are subject to change, since the final price and the install schedule are fixed by your written quote after the site visit.
Gate and Stair Materials for The Hills Homes
Most owners start with gate operator installation for a worn entry and iron staircases for decks and balconies, with powder-coated tube steel as the frame behind both. The finish sequence runs blast, zinc primer, then polyester powder cured in the oven, and touch-up kits stay on site for later scratches.
How a Gate Repair or Install Works in The Hills
The process runs in four steps. First, we inspect the gate and the opening, then set the clearance from the high point of the drive arc, usually 2 to 4 inches. Second, you approve a quote naming an articulated arm, linear or pad-mounted slide operator, chosen from leaf weight, column depth and daily cycles, and your HOA gets the drawing when the work changes how the gate looks. Third, we fabricate any new steel in our shop, or order a current operator. Fourth, our crew hangs and wires everything, then tests each operator, its monitored photo eyes and the edges in each entrapment zone before handover.
Why The Hills Households Hire Our Crew
The same crew that inspects a gate in The Hills repairs it, so nobody explains the problem twice, and a spiral stair for a roof deck with no room for a straight run from the back patio comes from the same shop. Our The Hills location manager books the HOA paperwork alongside the install date. Each gate is covered by our 2-year workmanship warranty for weld integrity, post plumb, hinge alignment and gate sag, while the operator has the maker's own warranty.
Nearby Towns We Serve From The Hills
We work across The Hills, and our crews cross into Lakeway homes, West Lake Hills estates and Steiner Ranch properties the same week. For the other cities we serve, see the gate service area page.
Other Services We Bring to The Hills
The Hills owners often pair a new operator with automatic gate repair for the leaf and hinges, or add gate service contracts for scheduled visits.
Questions The Hills Owners Ask About Gates
What does an operator replacement cost in The Hills?
A replacement operator in The Hills is estimated at roughly $1,850 to $3,600, and your written quote sets the final price once we see the gate.
Does my HOA need to approve gate work?
Ask your HOA for its requirements first, because the whole community is gated and approvals are part of nearly every job.
What if my operator is discontinued?
We swap in a current operator and reuse the sound wiring and the steel post.
How long does an operator swap in The Hills take?
Most swaps take an estimated 4 to 8 hours on site once the parts arrive.
Can a spiral stair fit a small deck?
Yes, a compact bolted spiral assembled on site, with a landing sized for carried chairs.
Can you keep an old gate running?
Yes, scheduled service visits with a written log catch hinges and sensors before they fail.
Set Up Your The Hills Gate Site Visit
Contact us today, and we will walk your The Hills property, check the gate and hand you a free written, itemized quote.
Your local contact
Who Runs Your The Hills Job
Names, photos and stories are on our about page.
Location manager covering The Hills
Runs the schedule for The Hills from the first site measure to the final safety test.
Free estimate
Get a Free Estimate for Metal Gates in The Hills
Call us or send the form, and we will book a site measure and a written estimate.
Calls only, we do not receive text messages.